Dräger VarioGard 3000 EC Transmitter

Detects toxic gases such as CO, NO2, NO, NH3, and oxygen
- Detects toxic gases such as CO, NO2, NO, NH3, and oxygen
- Offers high reliability with an electrochemical DrägerSensor
- Easy to install and operate, with minimal maintenance required
The comprehensive gas warning system for your building
Highlights
The Dräger VarioGard 3000 EC is a digital transmitter with an integrated electrochemical sensor. It detects toxic gases such as CO, NO2, NO, NH3 and oxygen in non Ex areas such as underground garages, laboratories and in cold storage houses.
Digital function
The Dräger VarioGard 3000 EC is connected with the controller via the digital VarioGard bus. This is how it is supplied with electricity and how it transmits its measuring results. You can easily control the entire VarioGard system via the VarioGard bus.
High reliability
The VarioGard 3000 EC is equipped with an electrochemical DrägerSensor. This sensor measures the concentration of toxic gases in the ambient air. The measured values are transmitted digitally to the controller and displayed there. An alarm is triggered if the gas concentration exceeds one or more of the limit values configured.
Easy operation
The operation is extremely easy. You can make all configurations comfortably from the controller using VarioGard software. You can configure and monitor four current limit values and four averages over time for each transmitter. The alarms are optically and acoustically displayed on the transmitter and transmitted to the controller. A three-colour LED indicates the operating status of the transmitter. The calibration is controlled using a magnetic wand via contact points.
Individually configurable
The VarioGard 3000 EC is adapted to your system. Depending on the application, different sensors are available sensors are available: CO, NO2 and NO for garages, O2 for oxygen supply systems and NH3 for e.g. cold storage houses.
Focus on sustainability
The VarioGard transmitter aligns with Dräger's sustainability philosophy by incorporating durable DrägerSensors, enabling an extended service life for the device. The new housing design optimises material usage compared to its predecessor. Additionally, existing accessories and electronic spare parts from the previous series remain compatible, reducing waste. Dräger also facilitates the recycling of old devices by accepting them for disposal.
Dräger VOICE Your hazmat-based safety product finder
Relevant information and specific recommendations of safety equipment for more than 1,500 hazardous substances.
Specifications
Key Facts
Technical Data
Approvals
Ammonia (anhydrous)
Carbon monoxide
Nitric oxide
Nitrogen dioxide
Oxygen
Files
- All documents7
- Product Information Sheets3
- Instructions for Use (IFU)1
- Brochures & Catalogues3












