Dräger Sampling Tubes and Systems

Analysis of the sample in a laboratory
- Analysis of the sample in a laboratory
- Reliable even with complex compounds and mixtures of substances
- detection of low concentrations possible
Highlights
The Dräger Sampling Tubes and Systems are very reliable in use even with complex compounds and mixtures of substances.
Accurate and reliable results
The hazardous substances in the air are collected using a suitable medium – such as activated charcoal, silica gel or molecular sieves. The sample is then analyzed in a laboratory with the aid of instrumental analysis. The sampling process is conducted either actively with a manual Dräger accuro or automatic Dräger-Tube pump X-act 5000, or passively via a diffusion sampler.
Suitable for complex cases
The Dräger Sampling Tubes and Systems allow to identify and measure different substances even under difficult conditions. This applies especially to very complex mixtures of substances or cases in which several similar substances are present at the same time.
Advantages of passive sampling
- Low price since no additional sampling equipment is required
- Long-term sampling does not require any preparation of the room
- Low determination and detection limits
- Fluctuations of concentration are integrated into the measurement result
- Overview measurements as well as surveillance of limit values
Advantages of active sampling
- Accumulation of substances in large amount of air within short time
- Low determination and detection limits
Files
- All documents4
- Product Information Sheets2
- Brochures & Catalogues1
- Technical Documentation1


